Compare list full

Cartridge fuses are low-cost electrical safety devices that are used for the overload protection of electrical circuits and appliances. They are cylindrical in shape and have a contact point at each end. Cartridge fuses are typically constructed from ceramic, glass, or porcelain. For more information on cartridge fuses please see our complete guide to <a href="https://uk.rs-online.com/web/generalDisplay.html?id=ideas-and-advice/fuses-guide">fuses</a>.RS stock a comprehensive range of cartridge fuses from industry-leading brands including Cooper Bussmann, Littelfuse, Mersen and of course RS PRO.<h2>How do cartridge fuses work?</h2>Cartridge fuses contain a piece of wire that melts when too much current flows through the circuit. When the wire melts, it breaks the circuit which prevents any damage. This is often referred to as burning out or blowing out. Put simply, when a fuse blows, the circuit is broken. Once a fuse has blown, it will need replacing to make the circuit complete again and allow the flow of current.<h2>What are the different types of fuse markings and speed codes?</h2>Cylindrical cartridge fuses are used in a range of industrial, commercial, and domestic applications. Selecting the correct fuse speed is essential for the protection of your device. Here are some of the most common markings you will find on a cartridge fuse.<ul><li>FF = Very Fast Acting (Flink Flink)</li><li>F = Fast Acting (Flink)</li><li>M = Medium Acting (Mitteltrage)</li><li>T = Slow Acting (Trage)</li><li>TT = Very Slow Acting (Trage Trage)</li></ul><h2>Why use cartridge fuses?</h2>Cartridge fuses are a relatively cheap way of protecting electrical equipment from short circuits and overcurrent. They are incredibly safe as they do not produce flames, arcs, or gas when they burn out and break the circuit.<h2>What current rating should you choose?</h2>Cartridge fuses are available in a range of standard amperages. When choosing the correct fuse for your application, you should choose a fuse with a nominally higher current rating than the device that it is being used in. This means that if there is a slight, harmless power increase, the fuse will not blow.

Buy Cartridge Fuses from leading manufacturers. Browse our wide range of Cartridge Fuses. Free Next Day Delivery.

Cartridge Fuses | Glass Fuses | 3 Amp Fuses | RS

Cartridge Fuses

Buy 10 AMP Fuses. Browse our latest 10 AMP Fuses offers. Free Next Day Delivery.

10 AMP Fuses | RS

From RS, a selection of high-quality 10 Amp fuses used in a range of industrial, commercial, and domestic applications. 10 Amp cartridge fuses are used to protect circuits that have a maximum input current of 10 amps. They are designed for the protection of components and electrical equipment from costly damage due to overcurrent.Our 10-amp fuses are available in a range of sizes and fuse speeds, in both glass and ceramic. Choose from a range of industry-leading brands including Cooper Bussmann, Littelfuse, SIBA, Mersen and of course RS PRO<h2>Features and Benefits</h2><ul><li>Robust and reliable</li><li>Manufactured from top quality materials</li><li>Designed and tested to meet the latest industry standards</li></ul>

Buy 20 mm Fuses. Browse our range of 5 x 20 mm fuse offers. Free Next Day Delivery.

20 mm fuses | 5 x 20 mm Fuses | RS

20 mm fuses are one of the most popular sizes of fuse in the market today. They are a standard size of cartridge fuse that typically measures 20 mm long and 5 mm in diameter. 20 mm fuses are available in both glass and ceramic and come in a range of amperages, fuse speeds and voltage ratings.RS offer an extensive range of 20 mm fuses from industry-leading brands such as Bussmann, Littelfuse, Schurter, SIBA and of course RS PRO.<h2>Where would I use a 20 mm fuse?</h2>These types of miniature fuses are typically used in panel and board protection circuits. Often used with a 5x20 fuse holder.

Browse our range of High-Quality 3 Amp Fuses. Buy 3 Amp Cartridge Fuses, Glass and Ceramic. Shop Today!

3 Amp Fuses | RS

3a fuses (sometimes written as 3-amp fuses) are common components in many types of household and workplace plugs and other electrical devices, both in the UK and elsewhere.<h2>What are 3a fuses commonly used for?</h2>3a fuses, specifically, are most often associated with the sorts of household plugs used to supply power to smaller and less powerful appliances around the home and office.In the UK, household plugs are often fitted either with a 3a fuse (if they supply a device or appliance that's relatively low-powered), or a 13a fuse (for more power-hungry equipment and larger machinery)The general rule of thumb states that fuses will typically be rated according to the approximate power rating of the appliance they're protecting - this is why it's important to always check you're replacing a fuse with an equally rated one (assuming the one that just blew was in fact correctly rated for the device in question!)Broadly speaking, the familiar type of red 3a fuses we've all seen in many household plugs and devices are usually advised for supplying appliances that draw up to around 700 watts from the wall - this might include equipment such as:<ul><li>Standard lamps, occasional lighting and other standalone illumination fixtures and fittings</li><li>Smaller (older) or more efficient (larger, modern) TVs, DVD players, and other relatively low-draw entertainment devices</li><li>Smaller and less power-hungry kitchen appliances, e.g. fridges, freezers and blenders (as opposed to much higher-powered devices like kettles and toasters)</li><li>Various mid-range tools and workshop appliances, including soldering irons, handheld drills, jig saws and more</li></ul>

Buy 30 Amp Cartridge Fuses. Browse our latest 30 Amp Cartridge Fuse offers. Free Next Day Delivery.

30 Amp Cartridge Fuses | RS

30 Amp Cartridge fuses are used in a wide range of industrial, commercial, and domestic applications. They are available in a range of sizes, fuse speeds and body materials. The most common type of 30 A cartridge fuse would be found in consumer units for the protection of sockets, cookers, and small shower circuits.30 A cartridge fuses are also used for other high-power circuits and appliances such as tumble dryers and air conditioners.RS offer a selection of ceramic fuses and glass fuses from well-known brands including Bussmann, Littelfuse, Schurter, Mersen and of course RS PRO.

Browse our range of High-Quality 5 Amp Fuses. Buy 5 Amp Cartridge Fuses, Glass and Ceramic. Shop Today!

5 AMP Fuses | RS

5A fuses are used in older equipment, most manufacturers have now standardised plus and fuse ratings to be either 3A or 13A.<h2>What are fuses used for?</h2>Fuses are safety devices designed to protect the electrical cable of the appliance rather than the appliance itself. Fuses are deliberately the weak link in a circuit and will blow' if an appliance or cable draws too much power, to prevent a fire occurring.You should also only replace a 5A fuse with another 5A fuse. If the fuse continues to blow do not put a higher amperage fuse in, check and correct the reason for the fuse blowing in the first place.

Buy Eaton Cartridge Fuses from RS. Browse the latest Cartridge Fuses by Eaton. Free next day delivery!

Eaton Cartridge Fuses | RS

Buy cartridge fuses from Bussmann. Browse our latest range of Bussmann Cartridge Fuses. Free Next Day Delivery.

Bussmann Cartridge Fuses | RS

From the industry-leading brand Bussmann, a comprehensive selection of high-quality cartridge fuses used in a range of industrial, commercial, and domestic applications. Our Bussmann cartridge fuses come in various amperages, fuse speeds, sizes and voltage ratings ensuring you can select the best fuse for all your circuit protection requirements.<h2>Features and Benefits</h2><ul><li>Robust and reliable</li><li>Manufactured from top quality materials</li><li>Designed and tested to meet the latest industry standards</li></ul>

Browse our range of High-Quality Altech Cartridge Fuses. Buy Altech Ceramic Cartridge Fuses. Shop Today!

Altech Cartridge Fuses | RS

RS are pleased to offer you a selection of high-quality cartridge fuses from the well-known brand Altech. Altech cartridge fuses are available in a range of sizes, amperages, voltages, and fuse speeds. Altech fuses have been designed and tested to meet UL and international standards, as well as being RoHS and REACH compliant.<h2>Where would I use an Altech Cartridge fuse?</h2>Selecting the correct fuse for your application is critical. Fuses are safety devices designed to protect electrical equipment and devices from damage due to short circuits or overload. Our range of cylinder fuses is mainly used in tough industrial applications such as motors and drives and other equipment.Some of the most common markings on these types of fuse are:<ul><li>gL = Mainly used for cable and line protection</li><li>aM = Used for the short circuit protection of motor circuits</li><li>gPV = Used for solar and photovoltaic protection</li><li>gR = Used for the protection of semiconductor devices</li></ul>

Buy Glass Cartridge Fuses, Browse our latest Glass Cartridge Fuse offers. Shop today, Fast Delivery.

Glass Cartridge Fuses |Cartridge Fuses| RS

Glass cartridge fuses, also known as glass tube fuses, are electrical fuses that consist of a glass tube with metal caps on both ends. They are designed to protect electrical circuits from overcurrent conditions by breaking the circuit when the current exceeds a certain level. The glass tube contains a fusible element, usually made of a metal or alloy with a low melting point.When a fault occurs in the circuit, such as a short circuit or excessive current, the fusible element inside the glass cartridge fuse heats up due to the increased current flow. Once the current exceeds the fuse's rated value, the fusible element melts and breaks the circuit, effectively protecting the electrical equipment from damage.Glass cartridge fuses are available in various sizes and current ratings to match different applications and voltage levels.&nbsp;Applications<ul><li>Automotive</li><li>Residential electrical systems</li><li>Commercial and industrial electrical systems</li><li>Electronics</li><li>Power supplies</li><li>HVAC systems</li><li>Renewable energy systems</li></ul>RS stocks a wide range of glass cartridge fuses from leading suppliers such as Eaton, Littelfuse, Schurter and RS PRO.&nbsp;

Explore reliable slow-blow fuses for circuit protection. Time-delayed response for handling inrush currents. Get the right fuse at RS.

Slow Blow Fuses | RS

Slow-blow fuses, also known as time-delay fuses or time-lag fuses, are a type of electrical protection device designed to withstand temporary overcurrent conditions without immediately blowing or opening the circuit. They are different from fast-acting (fast-blow) fuses, which will quickly open the circuit in response to any overcurrent.Slow-blow fuses are typically identified by a special marking or colour code to distinguish them from fast-blow fuses. It's crucial to use the correct type of fuse for your specific application to ensure safety and proper circuit protection.<h2>Key Features of Slow-Blow fuses include:</h2><ul><li>Time Delay - slow-blow fuses are engineered to tolerate short-term overcurrent conditions that can occur during power-up or when certain electrical devices, such as motors or transformers, start. They allow these temporary surges to pass without immediately interrupting the circuit.</li><li>High Inrush Current - some electrical devices, when powered on, can draw a high inrush current for a moment before settling into their normal operating current. Slow-blow fuses are designed to handle this inrush current without blowing.</li><li>Overcurrent Protection - while slow-blow fuses offer time delay, they still provide protection against prolonged overcurrent conditions, such as a sustained short circuit. If the overcurrent persists for an extended period, the fuse will eventually open to protect the circuit.</li></ul>These fuses are commonly used in applications where momentary overcurrent&rsquo;s are expected but should not cause nuisance tripping or unnecessary interruptions. Some examples of applications that may use slow-blow fuses include electric motors, transformers, power supplies, and electronic devices with capacitors that require time to charge during startup.

Ensure circuit safety with a 1.25A Slow Blow Fuse from RS - reliable protection against overcurrents for your electrical equipment.

1.25a Slow-Blow Fuse | RS

A 1.25A slow-blow fuse is an electrical safety device with a current rating of 1.25 amperes. With its precision, longevity, and versatility, it's the ideal choice for safeguarding your investments and ensuring the continuous operation of your equipment.When it comes to sensitive electronics and critical applications, precision is everything. The 1.25A slow- blow fuse is meticulously designed to handle overcurrent situations, offering a delayed response to transient power surges. This means your circuits remain unharmed, ensuring your equipment's longevity and performance.With its slow-blow technology, this fuse extends the lifespan of your electrical components. It's built to withstand the test of time, reducing downtime and maintenance costs.Whether you're in the automotive, industrial, or home electronics sector, the 1.25A Slow-Blow Fuse fits right in. Its wide applicability makes it an indispensable component in various electrical systems.

Explore circuit safety with our 1.6A Slow Blow Fuse from RS - precise protection against overcurrents for your equipment.

1.6a Slow-Blow Fuse | RS

In the realm of electrical protection, the 1.6A Slow-Blow Fuse has been crafted for precision and longevity, to ensure uninterrupted circuit safety while offering versatility for various applications.The 1.6A Slow-Blow Fuse has a current rating of 1.6 amperes and is designed to respond to overcurrent&rsquo;s with a slight delay, ensuring your circuits remain unharmed. It's your guarantee for equipment performance and durability. These types of fuses add an extra layer of protection by reducing the risk of short circuits, overheating, and electrical fires.This fuse is built to withstand the test of time, reducing maintenance costs and minimising downtime, all while preserving the health of your electrical components.Whether you're in automotive, industrial, or residential settings, these slow blow fuses offer versatile solutions. It seamlessly integrates into various electrical systems, becoming an essential component for all your needs.

Enhance circuit safety with 10A Slow Blow Fuses from RS - precise protection against overcurrents. Upgrade your electrical defense today!

10a Slow-Blow Fuse | RS

In the world of circuits and electronics, the 10A Slow-Blow Fuse stands as your reliable shield. Crafted for precision and durability, it guarantees uninterrupted power while ensuring versatile use across various applications.10A Slow-Blow Fuses have a current rating of 10 amperes and are designed to respond to overcurrent&rsquo;s with a slight delay, ensuring your circuits remain intact. These types of fuses add an extra layer of protection, reducing the risk of short circuits, overheating, and electrical fires.Whether in automotive, industrial, or residential settings, this fuse seamlessly integrates into various electrical systems, becoming a versatile solution for all your needs.

Elevate circuit safety with our 15A Slow Blow Fuse from RS – precise protection against overcurrents for your equipment. Enhance your defense today!

15a Slow-Blow Fuse | RS

In the intricate world of electrical systems, the 15A Slow-Blow Fuse takes center stage as your ultimate safeguard. Crafted for precision and endurance, it guarantees uninterrupted power while offering versatility across diverse applications.15A Slow-Blow Fuses have a current rating of 15 amperes and are engineered to react to overcurrent&rsquo;s with a slight delay, ensuring your circuits remain unscathed. It can help stop potential disasters like the risk of short circuits, overheating and electrical fires.Whether in automotive, industrial, or residential settings, this fuse seamlessly integrates into various electrical systems, offering a versatile solution for all your needs.

Enhance circuit safety at RS with our 1A Slow Blow Fuse - precise protection against overcurrents for your equipment. Upgrade your defense today!

1a Slow-Blow Fuse | RS

Our 1A Slow-Blow Fuse has been crafted to protect sensitive electronics and vital equipment by reducing the risk of short circuits, overheating, and electrical fires.These Slow-Blow Fuses have a current rating of 1 amperes and are designed to respond to overcurrent&rsquo;s with a slight delay, ensuring your circuits remain intact which guarantees optimal performance and equipment longevity.Whether in automotive, industrial, or residential settings, this 1A slow blow fuse seamlessly integrates into various electrical systems, becoming a versatile solution for all your needs.

Get a reliable 2.5A slow-blow fuse at RS. Protect your circuits with our quality fuses. Order now for peace of mind!

2.5a Slow-Blow Fuse | RS

A 2.5A slow-blow fuse is an electrical safety device designed to protect circuits and electrical equipment from overcurrent&rsquo;s. Unlike fast-blow fuses that respond immediately to overcurrent&rsquo;s, slow-blow fuses have a delayed reaction, allowing them to tolerate temporary surges in current while still protecting the circuit from sustained overloads.Slow-blow fuses consist of a fuse element made of a conductor, typically a wire or a thin strip, enclosed in a ceramic or glass tube. The conductor is the part that will melt or break when exposed to excessive current. They are often used in applications where brief current spikes are common, providing a balance between protection and operational tolerance.Slow-blow fuses are considered an essential component in many electrical systems to prevent damage and ensure safety.

Secure your circuits with a 20A slow-blow fuse from RS. High-quality protection for your electrical needs. Order now for peace of mind!

20a Slow-Blow Fuse | RS

A 20A slow-blow fuse is an electrical safety device designed to protect circuits and electrical equipment from overcurrent conditions. This type of fuse is rated to carry up to 20 amperes of current under normal operating conditions, but it features a delayed response to overcurrent&rsquo;s. This delay allows the fuse to tolerate temporary current surges while still providing protection against sustained overloads.Slow-blow fuses are often used in applications where short-term current spikes are common, striking a balance between protection and operational tolerance. When the overcurrent condition exceeds a critical level and persists, the fuse will eventually blow to interrupt the circuit and prevent damage to the electrical system and connected devices.

Secure your circuits with a 250mA slow-blow fuse from RS. Precision protection for your electrical needs. Order now for peace of mind!

250ma Slow-Blow Fuse | RS

A 250mA slow-blow fuse is an electrical safety device designed to protect circuits and electrical equipment from overcurrent conditions. The "250mA" indicates its current rating, which is 250 milliamperes or 0.25 amperes. Unlike fast-blow fuses that respond immediately to overcurrent&rsquo;s, slow-blow fuses have a delayed response, allowing them to tolerate temporary surges in current while still providing protection against sustained overloads.These fuses are often used in applications where precision and time delay are crucial. When an overcurrent condition occurs, the fuse's delayed response allows it to withstand short-lived current spikes that might be typical during normal operation. However, if the overcurrent situation becomes sustained and potentially damaging, the fuse will eventually blow to interrupt the circuit and prevent damage to the electrical system and connected devices.

Protect your circuits with a 25A slow-blow fuse from RS. Precision safety for your electrical needs. Order now for reliable protection!

25a Slow-Blow Fuse | RS

A 25A slow-blow fuse is an electrical safety device designed to protect electrical circuits and equipment from overcurrent conditions. The "25A" indicates its current rating, which is 25 amperes. Slow-blow fuses are characterised by their delayed response to overcurrent&rsquo;s. Unlike fast-blow fuses that react immediately, slow-blow fuses can tolerate short-lived current surges while still providing protection against sustained overloads.These fuses are typically used in applications where precision and time-delayed protection are essential. When an overcurrent situation occurs, the fuse's delayed response allows it to withstand temporary current spikes that may be common during normal operation. However, if the overcurrent condition becomes prolonged and potentially damaging, the fuse will eventually blow to interrupt the circuit, preventing damage to the electrical system and connected devices.

Get precise circuit protection with our 2A slow-blow fuse from RS. Ensure electrical safety in your applications. Order now for peace of mind!

2a Slow-Blow Fuse | RS

A 2A slow-blow fuse is an electrical safety device designed to protect circuits and electrical equipment from overcurrent conditions. The "2A" indicates its current rating, which is 2 amperes. Slow-blow fuses have a delayed response to overcurrent&rsquo;s, allowing them to tolerate short-term current surges while still providing protection against sustained overloads.These fuses are typically used in applications where precision and time-delayed protection are essential. When an overcurrent situation occurs, the fuse's delayed response allows it to withstand temporary current spikes that might be common during normal operation. However, if the overcurrent condition becomes sustained and potentially damaging, the fuse will eventually blow to interrupt the circuit, preventing damage to the electrical system and connected devices.

Protect your circuits with a 3.15A slow-blow fuse from RS. Precise safety for your electrical needs. Order now for reliable protection!

3.15a Slow-Blow Fuse | RS

A 3.15A slow-blow fuse is an electrical safety device designed to protect electrical circuits and equipment from overcurrent conditions. The "3.15A" indicates its current rating, which is 3.15 amperes. Slow-blow fuses are characterised by their delayed response to overcurrent&rsquo;s. Unlike fast-blow fuses that react immediately, slow-blow fuses can tolerate short-term current surges while still providing protection against sustained overloads.These fuses are typically used in applications where precision and time-delayed protection are necessary. When an overcurrent situation occurs, the fuse's delayed response allows it to withstand temporary current spikes that may be common during normal operation. However, if the overcurrent condition becomes sustained and potentially damaging, the fuse will eventually blow to interrupt the circuit, preventing damage to the electrical system and connected devices.

Secure your heavy-duty circuits with a 30A slow-blow fuse from RS. Precision protection for industrial and commercial needs. Order now!

30a Slow-Blow Fuse | RS

A 30A slow-blow fuse is an electrical safety device with a current rating of 30 amperes. It is designed to protect electrical circuits and equipment from overcurrent conditions. Slow-blow fuses, also known as time-delay fuses, have a delayed response to overcurrent&rsquo;s, allowing them to tolerate short-term current surges while still providing protection against sustained overloads.<h2>Who would use a 30A slow-blow fuse and for what?:</h2><ul><li>Industries with heavy machinery, such as manufacturing and construction, often use 30A slow-blow fuses to protect large motors, conveyors, and other industrial equipment. The delay in response allows these machines to handle temporary power surges without causing nuisance tripping.</li><li>In commercial facilities, where electrical systems power HVAC systems, elevators, and large office equipment, 30A slow-blow fuses are used to protect against short-term current fluctuations without interrupting essential services.</li><li>In residential settings, 30A slow-blow fuses may be employed to safeguard specific appliances and HVAC systems. These fuses ensure that momentary high-power demands, such as starting a refrigerator compressor or an air conditioner, do not cause unnecessary power disruptions.</li><li>Some automotive applications, particularly in heavy-duty vehicles, may use 30A slow-blow fuses to protect critical electrical components or systems.</li></ul>

Protect your circuits with a 4A slow-blow fuse from RS. Precision safety for various applications. Order now for reliable electrical protection!

4a Slow-Blow Fuse | RS

A 4A slow-blow fuse is an electrical safety device with a current rating of 4 amperes. It is designed to protect electrical circuits and equipment from overcurrent conditions. Slow-blow fuses, also known as time-delay fuses, have a delayed response to overcurrent&rsquo;s, allowing them to tolerate temporary current surges while still providing protection against sustained overloads.These fuses are typically used in applications where precise and time-delayed protection is required. They are ideal for protecting sensitive electronic components, motors, and other equipment from short-term power surges while preventing damage to the circuit in case of prolonged overcurrent situations.Slow-blow fuses are commonly used in both industrial and residential settings to ensure the safety and reliability of electrical systems.

Get precise circuit protection with a 500mA slow-blow fuse from RS. Ideal for electronics and sensitive equipment. Order now for reliable safety!

500ma Slow-Blow Fuse | RS

A 500mA slow-blow fuse is an electrical safety device with a current rating of 500 milliamperes (0.5 amperes). It is designed to protect electrical circuits and equipment from overcurrent conditions. Slow-blow fuses, also known as time-delay fuses, have a delayed response to overcurrent&rsquo;s, allowing them to tolerate temporary current surges while still providing protection against sustained overloads.These fuses are typically used in applications where precision and time-delayed protection are essential. When an overcurrent situation occurs, the fuse's delayed response allows it to withstand temporary current spikes that may be common during normal operation. However, if the overcurrent condition becomes sustained and potentially damaging, the fuse will eventually blow to interrupt the circuit, preventing damage to the electrical system and connected devices.

Secure your circuits with a 5A slow-blow fuse from RS. Precision protection for various applications. Order now for reliable electrical safety!

5a Slow-Blow Fuse | RS

A 5A slow-blow fuse is an electrical safety device with a current rating of 5 amperes. It is designed to protect electrical circuits and equipment from overcurrent conditions. Slow-blow fuses, also known as time-delay fuses, have a delayed response to overcurrent&rsquo;s, allowing them to tolerate temporary current surges while still providing protection against sustained overloads.These fuses are typically used in applications where precision and time-delayed protection are essential. When an overcurrent situation occurs, the fuse's delayed response allows it to withstand temporary current spikes that may be common during normal operation. However, if the overcurrent condition becomes sustained and potentially damaging, the fuse will eventually blow to interrupt the circuit, preventing damage to the electrical system and connected devices.

Get reliable circuit protection with a 6.3A slow-blow fuse from RS. Ideal for sensitive electronics and applications with variable loads. Order now!

6.3a Slow-Blow Fuse | RS

A 6.3A slow-blow fuse is an electrical safety device with a current rating of 6.3 amperes. It is designed to protect electrical circuits and equipment from overcurrent conditions. Slow-blow fuses, also known as time-delay fuses, have a delayed response to overcurrent&rsquo;s, allowing them to tolerate temporary current surges while still providing protection against sustained overloads.You would use a 6.3A slow-blow fuse in applications where precise and time-delayed protection is crucial. The are ideal for protecting sensitive electronic components and devices. These fuses can tolerate brief power surges during device startup or operation without tripping unnecessarily. Equipment with varying power demands, like lighting systems or appliances, can benefit from slow-blow fuses. They prevent nuisance tripping due to momentary power fluctuations.

Ensure circuit safety with a 6A slow-blow fuse from RS. Ideal for various applications. Order now for reliable electrical protection!

6a Slow-Blow Fuse | RS

A 6A slow-blow fuse is an electrical safety device with a current rating of 6 amperes. Slow-blow fuses, also known as time-delay fuses, are designed to protect electrical circuits and equipment from overcurrent conditions. What sets them apart is their delayed response to overcurrent&rsquo;s, allowing them to tolerate temporary current surges while still providing protection against sustained overloads.You would use a 6A slow-blow fuse in various applications where precise and time-delayed protection is necessary. These fuses are commonly found in situations where electrical equipment, circuits, or devices may experience short-term power surges during startup or operation, without the fuse tripping unnecessarily. They are valuable for safeguarding sensitive electronics, motors, and other equipment from damage due to overcurrent conditions.

Protect circuits with an 8A slow-blow fuse from RS. Ideal for precise and time-delayed protection in various applications. Order now for safety!

8a Slow-Blow Fuse | RS

An 8A slow-blow fuse is an electrical safety device with a current rating of 8 amperes. Slow-blow fuses, also known as time-delay fuses, are designed to protect electrical circuits and equipment from overcurrent conditions. What distinguishes them is their delayed response to overcurrent&rsquo;s, allowing them to tolerate short-term current surges while still providing protection against sustained overloads.You would use an 8A slow-blow fuse in various applications where precise and time-delayed protection is essential. These fuses are commonly found in situations where electrical equipment, circuits, or devices may experience temporary power surges during startup or operation, without the fuse tripping unnecessarily. They are valuable for safeguarding sensitive electronics, motors, and other equipment from damage due to overcurrent conditions.

Get precision protection with ceramic tube fuses from RS. Ideal for various applications. Order now for reliable electrical safety!

Ceramic tube | RS

A ceramic tube fuse is a type of electrical safety device designed to protect circuits and equipment from overcurrent conditions. It consists of a cylindrical, hollow ceramic tube that contains a fuse element. Ceramic tube fuses are typically used in applications where electrical protection is necessary, and they offer several advantages:<ul><li>They are available in various current ratings, and when the current exceeds the rated value, the fuse element inside the ceramic tube will melt or break, interrupting the circuit.</li><li>Some ceramic tube fuses have a time-delay characteristic, also known as "slow-blow" or "time-lag." This means they can tolerate short-term overcurrent&rsquo;s without blowing, making them suitable for applications where brief power surges are common.</li><li>High-Temperature Resistance - ceramic material is known for its high-temperature resistance, which allows these fuses to operate in environments with elevated temperatures without deforming or breaking.</li><li>Ceramics offer good chemical resistance, making them suitable for applications where exposure to corrosive substances may occur.</li></ul>Ceramic tube fuses are widely used in various industries, including automotive, industrial, electronic, and residential applications. They protect sensitive electronics, motors, appliances, and electrical circuits from damage due to overcurrent conditions. The choice of a specific ceramic tube fuse depends on the application's current requirements, time-delay characteristics, and environmental conditions.

Enhance circuit protection with time delay slow-blow fuses from RS. Precision safety for diverse applications. Order now for reliable electrical defense!

Time Delay Slow-Blow Fuse | RS

A time-delay slow-blow fuse, also known as a time-lag fuse, is an electrical safety device designed to provide delayed protection against overcurrent conditions. These fuses are characterised by their ability to tolerate temporary current surges without blowing immediately, making them suitable for applications where short-term power spikes are common. They offer a balance between protecting circuits and equipment while allowing for the brief, high-current demands of certain devices.Time-delay slow-blow fuses are available in various types and sizes, typically categorised by their physical dimensions, and current ratings which are expressed in amperes (A). Examples of common current ratings include 1A, 5A, 10A, 20A and 30A.These fuses are used in various industries, including automotive, industrial, electronics, and residential applications. They protect sensitive electronics, motors, appliances, and electrical circuits from damage due to overcurrent conditions. When selecting a time-delay slow-blow fuse, it's essential to consider the voltage rating, current rating, and time-delay characteristic to ensure precise protection for the application.

Enhance circuit safety with our ceramic slow-blow fuses from RS. Precision protection for diverse applications. Order now for reliable electrical defense!

Ceramic Slow-Blow Fuse | RS

Ceramic slow-blow fuses are a type of electrical safety device designed to protect circuits and equipment from overcurrent conditions. They are constructed using ceramic materials, which offer several advantages:<ul><li>Precision Protection - they can withstand temporary overcurrent&rsquo;s without tripping, making them ideal for applications where brief power surges are common. This allows critical equipment to operate uninterrupted.</li><li>Time-Delayed Response - The "slow-blow" characteristic means these fuses provide a time-delayed response to overcurrent&rsquo;s. This delay ensures that short-term power fluctuations or inrush currents don't cause nuisance tripping, enhancing the reliability of electrical systems.</li><li>Durability - suitable for demanding environments. They can withstand higher temperatures and harsh conditions without compromising safety.</li></ul>With ceramic slow-blow fuses, you have peace of mind that your circuits and equipment are safeguarded. Their precise, time-delayed protection helps prevent costly downtime and repairs.

Get precision protection with glass slow-blow fuses from RS. Ideal for various applications. Order now for reliable electrical safety!

Glass Slow-Blow Fuse | RS

A glass slow-blow fuse is an electrical safety device designed to protect circuits and equipment from overcurrent conditions. It is constructed using a glass tube that houses a fuse element. These fuses are known for their time-delayed response to overcurrent&rsquo;s, allowing them to tolerate temporary current surges without tripping while still providing protection against sustained overloads.<h2>Why use glass slow-blow fuses?</h2><ul><li>Precision Protection - they respond to overcurrent conditions with a slight delay, ensuring that short-term power surges do not disrupt the operation of equipment and circuits.</li><li>Glass construction ensures the fuses are heat-resistant and can withstand harsh environmental conditions, making them a reliable choice for many applications.</li><li>Time-Delay Characteristic - prevents nuisance tripping and allows electrical systems to handle temporary surges.</li></ul>Glass slow-blow fuses are considered an essential component in many electrical systems, offering both precision and time-delayed protection. Whether it's protecting sensitive electronics, motors, or appliances, these fuses ensure the reliability and safety of your electrical equipment and circuits.

Eaton Cartridge Fuses

Popular Searches